Nanobebe, Переходная бутылочка, этап 2, серая, упаковка из 3 шт. по 8 жидк. унц (240 мл)
- Виробник: Nanobebe
- Код товару: NNB-62854
- upc код: 7290016628548
- Наявність: Є в наявності Вес товара: 0.29 кг. Размеры (ДxШxВ): 20.8x7.7x20.4 см.
-
₴1709
What's inside:
Familiar shape assists transition from breast to bottle and back.
Рекомендации по применениюAssembly Instructions:
Step 1. Remove storage cap or nipple and ring prior to assembling the bottle
Step 2. Simply push the bottle body into the base (do not attempt to twist shut).
Holding the base and bottle body across from each other, simply push together. Or, place base on a flat surface and push bottle body down into it.
Preventing leaks - Make sure all edges are evenly aligned and flash tight.
Freezing Breastmilk:
Warm your nanobebe bottle in a bowl filled warm water. Fluid level should not reach the nipple ring. Tilt the bottle gently to remove any trapped air underneath, then swirl the bottle inside the water until the desired temperature is reached.
Always check the temperature of the milk before feeding your baby by dropping few drops on the inside of your wrist.
Important Reminder:
Storage cap must be removed from bottle prior warming.
Replace with nipple and travel cover.
Feeding:
Mimic Breastfeeding - Thanks to its natural, breast-like design, the nanobebe feeding bottle makes it easier to combine breast and bottle feeding. When baby is crying and hungry, you can speed up prep time without exposing the breast milk to nutrients damaging temperatures.
Hold this way to feed - Hold the bottle between your fingers and thumb. Make sure milk fills the nipple. With adult supervision, baby may hold the bottle while feeding.
Disassemble:
Step 1: Remove storage cap or nipple and ring prior to disassembling the bottle.
Step 2: To disassemble your nanobebe bottle simply push down on the lip to release the base from bottle body.
Cleaning and Sterilizing:
For Your Child's Safety:
Maintenance:
Assembly Instructions:
Step 1. Remove storage cap or nipple and ring prior to assembling the bottle
Step 2. Simply push the bottle body into the base (do not attempt to twist shut).
Holding the base and bottle body across from each other, simply push together. Or, place base on a flat surface and push bottle body down into it.
Preventing leaks - Make sure all edges are evenly aligned and flash tight.
Freezing Breastmilk:
Warm your nanobebe bottle in a bowl filled warm water. Fluid level should not reach the nipple ring. Tilt the bottle gently to remove any trapped air underneath, then swirl the bottle inside the water until the desired temperature is reached.
Always check the temperature of the milk before feeding your baby by dropping few drops on the inside of your wrist.
Important Reminder:
Storage cap must be removed from bottle prior warming.
Replace with nipple and travel cover.
Feeding:
Mimic Breastfeeding - Thanks to its natural, breast-like design, the nanobebe feeding bottle makes it easier to combine breast and bottle feeding. When baby is crying and hungry, you can speed up prep time without exposing the breast milk to nutrients damaging temperatures.
Hold this way to feed - Hold the bottle between your fingers and thumb. Make sure milk fills the nipple. With adult supervision, baby may hold the bottle while feeding.
Disassemble:
Step 1: Remove storage cap or nipple and ring prior to disassembling the bottle.
Step 2: To disassemble your nanobebe bottle simply push down on the lip to release the base from bottle body.
Cleaning and Sterilizing:
